FA 300-2 Ex
FA 300-2 Ex dew point meter
Valmistaja: CS Instruments GmbH
HUOM! Poistuva tuote, katso esim. : FA 515 Ex
With the Atex approval for Zone 1 the established dew point measuring instruments FA 300-2 can now be used in areas of the industry as well.
FA 300-2 Ex may only be used in connection with approved Ex-rated power supplies or safety barriers or galvanic separating elements with max.:
UO = 30 V max.
IO = 100 mA max.
P0 = 1 W max.
Special features
- Robust design
- Pressure-tight up to 300 bar
- Long-term stable humidity sensor, approved for years
- 4...20 mA analogue output, in 2-wire system
- Further parameters adjustable via software: % RH, g/m³, mg/m³, ppm V/V, g/kg
- CS Service Software for data storage and calibration (no approval for explosive areas)
Liitteet:
DataSheet_FA300Ex_S10.pdf
IM_FA300_2Ex_engl_V1_04_2009.pdf
Ominaisuudet:
Measuring range: |
Pressure dew point in °Ctd |
FA 300-2 Ex: |
-80...20°Ctd = 4...20 mA |
Pressure range: |
-1...16 bar |
Power Supply: |
24 VDC (10...30 VDC) |
Accuracy: |
± 0,5°C at -10...50°Ctd |
Protection class: |
IP 65 |
EMC: |
according to DIN EN 61326 |
Operating temp.: |
-20...70°C |
Storage temp.: |
-40...80°C |
Burden for analogue output: |
< 500 Ohm |
Screw-in thread: |
G1/2" stainless steal |
Housing material: |
polycarbonate |
Sensor protection: |
Sintered filter 50 μm stainless steel |
Tuote: 6993070.0